The four best cleaning tricks The perfect home remedy if you have little time to clean The best trick to keep your oven looking like new Neither London nor Brussels: Europe’s oldest city is in Spain, and not the one you’re thinking of.I’m a lawyer, and here’s what you should do if the police ask you for an ID and you don’t have it with you.
Marble is one of the most expensive materials that can be found in a house, which is why it is synonymous with elegance. However, when it comes to cleaning it, this can go against us; it is very delicate and you will need to use your best tricks to make it perfect.
Although marble is very aesthetic, it needs a lot of care and any neglect can lead to permanent stains or cause it to lose its inherent shine.
No matter how many commercial products appear on the market, the best thing we can actually do to keep it spotless is to use this home-made trick. It is very easy to use and you do not risk damaging the material.
Mistakes we all make when cleaning marble
Marble is a porous and extremely sensitive stone, so not all products are suitable for cleaning it.
For example, one of the most common mistakes is to use vinegar, lemon or alcohol to clean it.
While these ingredients are effective for other surfaces, they can cause corrosion and leave irreversible stains on marble.
Another common mistake is thinking that rubbing harder or using coarse scouring pads will give better results. Doing so will only scratch the surface and remove the shine.
In addition, using too much water and not drying the surface properly will also leave marks that cannot be removed and will deteriorate the material over time.
The most important trick for cleaning marble at home in seconds
Cleaning places like the bathroom or kitchen is always a problem because it is time-consuming and does not achieve the expected results.
Therefore, if you want to keep your marble shiny, a mixture of baking soda and hydrogen peroxide is the best trick. Of course, for it to work, you have to use it properly.
To clean marble at home and leave it shiny, all you need to do is use baking soda and hydrogen peroxide in the following way:
- Prepare the mixture: add three tablespoons of baking soda to a bowl and mix it with half a glass of hydrogen peroxide (3% hydrogen peroxide). Stir until you have a smooth paste.
- Apply to marble: Using a microfibre cloth, spread the paste on the surface of the marble, paying particular attention to areas with stains or signs of wear.
- Leave the mixture to work: Leave the mixture to work for about 30 minutes to allow the bicarbonate and hydrogen peroxide to work.
- Wipe with lukewarm water: use a damp cloth to remove all traces of the mixture without rubbing too hard or using too much force.
- Dry completely: To avoid water marks, use another dry microfibre cloth and wipe the entire surface of the marble until it is completely shiny.
This does not need to be done every day. For example, normally the best trick you can use is a gentle cleaning with water and a neutral soap that will not damage the surface.
