Resources
Installation: Recommended Tools & Materials
- Safety Glasses
- Measuring Tape
- Square
- Utility Knife
- Straight Edge
- Spacers
- Chalk Line
- Embossing Leveler/Floor Patch (if necessary)
- Rubber Mallet
- Circular Saw with Rip Blade
1. Start by engaging the plank on the long side (angle-system)
2. Slide the plank until it reaches the short side of the next plank and drop gently
3. Press with your thumb on both ends of the short side
4. Continue pressing until you hear the ‘click’ sound of the one piece Drop Lock System
5. Hit gently with a soft-faced hammer on both sides of the short-end
6. Planks are now fully locked
